Strap Yourself In: NLRB’s Joint Employer Rule is About to Change Again

Strap yourself in. It’s going to be a bumpy ride.

I drove behind this band of safety-conscious paddle boarders near Chicago recently. The guy in back is secured in by bungy cord. At least he looks comfortable.

The NLRB is about to make things a lot more uncomfortable for businesses concerned about joint employment.

As discussed here, the NLRB made clear earlier this year that it wants to revamp the independent contractor vs. employee test under the National Labor Relations Act.

Expect a new rule on joint employment to drop any day. The NLRB indicated several months ago that the joint employment rule was a target in its rulemaking agenda, and the expected release date is July 00, 2022.

Like most of you, I switched from the Julian calendar to the Gregorian calendar in 1752. While the changeover caused 11 days in September 1752 to be lost, I missed the memo about inserting a 0th day in July, starting 270 years later. Since I could find no way to mark the expected release date in my iPhone, I’ll give the NRLB the benefit of doubt and assume the date is a placeholder for “sometime in July.”

On Friday, it will be “sometime in July.” So get your bungy cord ready. You may need to take steps to better protect your business against joint employment risks.

The new rule will displace the current Trump-era regulation, which currently requires direct and substantial control over essential terms and conditions of employment before joint employment can be found.

Expect the new rule to track the Browning-Ferris standard imposed by the Board in 2015. Under Browning-Ferris, when one company has the right to control aspects of the work, joint employment exists — regardless of whether control is actually exerted, and regardless of whether the control is over wages, hours, scheduling or anything else that fits within the meaning of essential terms and conditions.

Joint employment under the NLRA can have several effects:

1. It can force you to the bargaining table for matters involving workers you did not consider to be your employees.

2. It can open the door to bargaining units that include workers you didn’t think were your employees.

3. It can open another door to bring union organizing activity into your business – through non-employee workers.

4. It can convert illegal secondary picketing into lawful primary picketing. If another company’s employees picket your site but the workers turn out to be your joint employees, they have the right to be there.

5. Each business that is a joint employer may be found jointly and severally liable for the other’s unfair labor practices.

When the new rule is posted, we’ll discuss what employers should do in response. Until then, enjoy the summer and try paddle boarding. But try to use a car with enough seats.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

© 2022 Todd Lebowitz, posted on WhoIsMyEmployee.com, Exploring Issues of Independent Contractor Misclassification and Joint Employment. All rights reserved.

2018_Web100Badge
 

Inedible Food: DOL Starts New Rulemaking Process to Toughen FLSA Independent Contractor Test

I saw this truck while driving home last week from my daughter’s college graduation. Now I’m no livestock dietician (I failed that course in law school), but this seems like the worst possible thing to feed your animals.

Whoever’s behind the labeling also needs some help with marketing. I know I wouldn’t buy that.

I’m also not buying the DOL’s recent announcement that it’s holding two public forums to help it decide what to do about a new independent contractor misclassification test. I think we all know what the DOL is going to do already.

The DOL will hold an Employer Forum on June 24, then a Worker Forum on June 29. Anyone can attend. RSVP links are here (6/24) and here (6/29).

After this charade open-minded exchange of viewpoints, the DOL will get to work preparing a new rule for determining who is an employee under the Fair Labor Standards Act (FLSA). The current regulation, issued by the Trump DOL, refocuses the traditional Economic Realities Test inquiry on two core factors: (1) the nature and degree of the individual’s control over the work, and (2) the individual’s opportunity for profit or loss. The Biden DOL tried (unsuccessfully) to prevent the Trump rule from going into effect, but a federal court ruled that the Biden DOL’s attempt to dismantle the rule was flawed, and the Trump rule therefore went into effect.

Now, let’s not kid ourselves. Just because a court told the Biden DOL that it’s stuck with this Trump-made rule doesn’t mean anyone at the DOL is actually applying it. The Biden DOL has said it plans to rewrite the rule, pronto. The new rule will make it harder to classify workers as independent contractors under the FLSA. We already know that’s going to happen, even if we don’t know the precise language to be used.

In late 2022, the DOL will issue its new rule, which will be like the old rule that we had before the Trump DOL’s new rule. Meet the new boss, same as the old boss. And with each new administration, it will become harder then easier then harder to be classified as a contractor under the FLSA.

So I will not be wasting my time listening in on these forums. I expect they’ll be as useful as inedible food. Which cannot be good for the GI tract.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

© 2022 Todd Lebowitz, posted on WhoIsMyEmployee.com, Exploring Issues of Independent Contractor Misclassification and Joint Employment. All rights reserved.

2018_Web100Badge
 

Get Aligned on Commissions: Ten Tips For Using Independent Sales Reps

Zippy incorrectly chooses portrait instead of landscape

Getting properly aligned is important. That’s true not only when using a dog bed, but also when using independent sales reps.

Sales reps generally receive commissions. When commissions systems are unclear, disputes arise. We don’t want disputes. You may think your commission system is clear, whether by tradition or otherwise. But it’s probably not as clear as you think. Unclear commission plans lead to lawsuits, especially after the relationship with a sales rep ends.

Here are ten tips for avoiding commission disputes. These tips are helpful whether your sales rep is an independent contractor or an employee.

1. Put the commission plan in writing, and get the rep to sign it. Many states require written, signed commission plans for employees. (California, I’m looking at you!) But even when not required by law, a clearly drafted and accepted plan is the best way to avoid disputes.

2. Define what constitutes a sale. Is a sale complete when the customer pays for the good? When the good is delivered? When it’s accepted? When some period for returns has expired? Whatever you decide, state it clearly.

3. Define when a commission is earned. Usually there are several things that have to happen before a commission is earned. List them all, and make clear that a commission is not earned until all of these things have occurred.

4. Specify the timing of when commission payments are due. For employee sales reps, you might have less flexibility than with contractors, since state laws often require that employees are paid at certain intervals. But you can also create some space for yourself in your definition of when a commission is considered “earned.”

5. Clarify whether the sales rep must still be employed (or still under contract) to earn a commission. This term will be viewed in tandem with your explanation of when a commission is considered “earned.” Some states (hey there, California!) require that the commission has been paid if the employee has basically done everything needed to earn the commission, even if employment has ended. Calling the rep a contractor won’t necessarily get around that, since as we know, California does not grant a lot of deference to classifying workers as contractors instead of employees.

6. Explain how the commission amount is calculated. The formula might be A times B times C. Whatever it is, write it out.

7. Clarify the relevant time period. If the commission plan is for 2022 only, say so. If the commission plan overrides all prior year plans, say that too.

8. What about charge backs? Are there circumstances when a commission might be paid but you’d have to recoup some of the payment through a charge back? Describe when chargebacks are permitted, if at all.

9. Don’t assume. Spell everything out. Just because there haven’t been commission disputes in the past doesn’t mean they won’t happen in the future. A recently departed sales rep is going to be more aggressive about a commission dispute than one who is still happily engaged, especially if the rep just closed a big deal was separated before the company received payment from the customer. Without a clearly drafted plan, that’s a lawsuit waiting to happen.

10. Write for the jury. A stranger reading your commission plan should be able to tell whether a commission is earned or not, how much the commission should be, and when the commission is due. It needs to be that clear. If there’s ambiguity, expect that the disputed term will be interpreted in favor of the sales rep. After all, you wrote the plan, not the rep.

Bonus 11th Tip: Don’t forget state law. State law may contain requirements for commission plans. Know where your salespeople are working and where they are selling. If multiple states are involved, consider adding a choice of law clause.

Getting aligned on commissions before there’s a dispute can go a long way toward preventing a dispute. Getting misaligned on a dog bed may lead to back pain or a funny picture, but getting misaligned on commissions can lead to expensive litigation.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

© 2022 Todd Lebowitz, posted on WhoIsMyEmployee.com, Exploring Issues of Independent Contractor Misclassification and Joint Employment. All rights reserved.

2018_Web100Badge